EN backup network: Unterschied zwischen den Versionen

Aus Autopoll-Dokumentation
Zur Navigation springen Zur Suche springen
← Zum vorherigen Versionsunterschied
Oehlstoeter (Diskussion | Beiträge)
Mitarbeiter, Bürokraten, Administratoren
9.752 Bearbeitungen
Keine Bearbeitungszusammenfassung
Oehlstoeter (Diskussion | Beiträge)
Mitarbeiter, Bürokraten, Administratoren
9.752 Bearbeitungen
Keine Bearbeitungszusammenfassung
 
(11 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
{{Vorlage:InArbeit|}}
{{Vorlage:TOCright}}
{{Vorlage:TOCright}}
==Preamble==
==Preamble==
Zeile 6: Zeile 5:
'''Hint''': If a Firebird database server 2.x is in use, then the parameter (Settings-parameter) "dasi - checkgbk" has to be set to N.
'''Hint''': If a Firebird database server 2.x is in use, then the parameter (Settings-parameter) "dasi - checkgbk" has to be set to N.


With a single place version the firebird backup file of the Autopoll database (APVx.GBK) is created on the local computer. That means step 2 getting the firebird backup file of the Autopoll database (APVx.GBK) for storing it in the ZIP file causes no problems because everything is running on the same computer and all rights are granted.
With a single place version the firebird backup file of the Autopoll database (APVx.GBK) is created on the local computer parallel to the Autopoll database. That means step 2 getting the firebird backup file of the Autopoll database (APVx.GBK) for storing it in the ZIP file causes no problems because everything is running on the same computer and all rights are granted.


In einem Netzwerk-System sollte die Autopoll Datensicherung so eingestellt werden, dass sowohl ein Autopoll Client auf dem Server als auch ein Autopoll Client auf jedem Client-PC die Datensicherung ausführen kann. Werden die folgenden  Einstellungen nicht vorgenommen, kann nur vom Server aus gesichert werden. Eine Sicherung vom Client wäre nicht erfolgreich da die Autopoll Sicherungsdatei (APVx.GBK) in der ZIP Datei nicht enthalten wäre oder die Sicherung mit einem Fehler abbricht.
In a network version the Autopoll backup should be configured so that the Autopoll application on the server and all Autopoll applicationc on every client computer can execute an Autopoll backup. If the following configurations are not being made then the Autopoll backup can only be made with the Autopoll application on the server. A backup made from a client computer would not be successful because the firebird backup file of the Autopoll database (APVx.GBK) is not in the ZIP file or the backup will end with an error.
 
With the following configurations the Autopoll client should be able to get the firebird backup file of the Autopoll database from the server for storing it afterwards like mentioned in step 2 in the ZIP file.


Mit den folgenden Einstellungen bekommt der Autopoll Client die Möglichkeit von einem Client-PC aus die Autopoll Sicherungsdatei (APVx.GBK) vom Server abzuholen, um diese dann wie in Schritt 2 vorgesehen in der ZIP-datei zu speichern.


==Execution==
==Execution==


* Expertenmodus:  
* Expert mode:  


[[Datei:DaSi_N_1_EN.PNG]]
[[Datei:DaSi_N_1_EN.PNG]]


Es öffnet sich ein Zusatzbereich für die, für die Autopoll Datensicherung im Netzwerk notwendigen, Pfad-Einstellungen.
An additional area is being displayed in which the necessary path configurations have to be made for the backup in a network version.


Datensicherung mit aktiviertem Expertenmodus:  
Backup with activated Expert mode:  
Das Aktivieren des Expertenmodus ist nur notwendig, wenn man Änderungen der Pfade vornehmen muss (z.B. Erstinstallation oder Umzug Server-PC). Nach erfolgter Änderung und durchgeführter Datensicherung werden die Pfade in der Datenbank zentral gespeichert und sind bei der nächsten Datensicherung voreingestellt.  
The activation of the Expert mode is only necessary when changes in the paths have to be made (e.x.: initial installation or change of the server computer). After the changes have been made and after a backup has been executed with the new paths, the paths will be stored in the database and will be used from then on when executing a backup.  


{{clr}}
{{clr}}
==Description==
==Description==


[[Datei:DaSi_N_2_EN.PNG|thumb|top|left]]
[[Datei:DaSi_N_2_EN.PNG|480px|thumb|top|left]]


* Kompression:  
* Compression:  
Wenn die Option aktiv ist (Voreinstellung), dann wird die Autopoll Datenbank zunächst gesichert und anschließend wird die Autopoll-Sicherungsdatei (APVx.GBK) in eine ZIP-Datei komprimiert. Ist die Option deaktiviert wird nur die Autpoll-Sicherungsdatei (APVx.GBK) erzeugt.
If this option is active (by default), then first the Autopoll database will be backuped and then the created firebird backup file of the Autopoll database (APVx.GBK) will be stored and compressed in a ZIP file. If this option is deactivated only the firebird backup file of the Autopoll database (APVx.GBK) will be created.


* gbk Datei Server
* gbk file server
Pfad der Autopoll-Sicherungsdatei (APVx.GBK) vor der Komprimierung - aus Sicht des Server-PC -
Path of the firebird backup file of the Autopoll database (APVx.GBK) before the compression - server computer point of view -


* gbk Datei Client
* gbk file client
Pfad der Autopoll-Sicherungsdatei (APVx.GBK) vor der Komprimierung - aus Sicht des Client-PC -. Dieser Pfad muss auf jeden Fall der jeweiligen Umgebung angepasst werden. Es ist der Pfad vom Client-PC zur Autopoll-Sicherungsdatei (APVx.GBK) auf dem Server-PC.  
Path of the friebird backup file of the Autopoll database (APVx.GBK) before the compression - client computer point of view - This path has to be configured according to the present infrastructure. It is the path from the client computer to the firebird backup file of the Autopoll databse (APVx.GBK) on the server computer.  


* alle weiteren Einstellmöglichkeiten sind an dieser Stelle unwichtig. Die Standardeinstellungen reichen vollkommen aus.
* all other configuration options are not important. The default values are sufficient.


{{clr}}
{{clr}}
===GBK Datei Client Variante 1: „mappen“===


[[Datei:DaSi_N_2_V1_EN.PNG|thumb|top|left]]
===GBK file client variant 1: „mapping“===
 
[[Datei:DaSi_N_2_V1_EN.PNG|480px|thumb|top|left]]


Das Server Laufwerk oder das Server-Verzeichnis, in dem die Autopoll Datenbank (APVx.GDB) und die Autopoll Sicherungsdatei (APVx.GBK) liegen, wird gemappt.  
The server drive or the server folder in which the Autopoll database (APVx.GDB) and the firebird backup file of the Autopoll database (APVx.GBK) are placed, will be mapped.


Beispiel: Z:\AutopollV4\Daten\APV4.GBK oder X:\APV4.GBK  
Example: Z:\AutopollV4\Daten\APV4.GBK or X:\APV4.GBK  


{{clr}}
{{clr}}
{{Vorlage:Achtung | '''Beim Mappen muss darauf geachtet werden, dass das gemappte Laufwerk auf jedem Client-PC das selbe Mapping (den selben Buchstaben) erhält, da wie o.b. die Pfade nur einmal in der Autopoll Datenbank hinterlegt werden und nicht für jeden Client-PC separat.'''}}
{{Vorlage:Achtung | '''When doing the "mapping" it has to be ensured that the mapped drive gets the same drive letter on each client computer because the above mentioned path is only stored once in the database and can*t be configured for every client computer separately.'''}}


{{clr}}
{{clr}}


=== GBK Datei Client Variante 2: „Windows Freigabe“ ===
=== GBK file client variant 2: „Windows clearance“ ===


[[Datei:DaSi_N_2_V2_EN.PNG|thumb|top|left]]
[[Datei:DaSi_N_2_V2_EN.PNG|480px|thumb|top|left]]


Direkter Zugriff auf das freigegebene Verzeichnis auf dem Server (via UNC Pfad)  
Direct access to the cleared folder on the server computer (via UNC path)  


Beispiel: \\AutopollV4\apv4.gbk  
Example: \\AutopollV4\apv4.gbk  


Die Windows Freigabe auf die Autopoll-Datenbank (APVx.GDB) und die Autopoll-Sicherungsdatei (APVx.GBK) sollte vom Administrator bei der Installation der Autopoll Netzwerkversion bereits konfiguriert worden sein.  
The Windows clearance to the Autopoll database (APVx.GDB) and the firebird backup file of the Autopoll database (APVx.GBK) should already be configured during the installation of an Autopoll network version by the administrator.


Diese Variante ist dem "mappen" vorzuziehen.
This variant is to be prefered to the "mapping".
{{clr}}
{{clr}}


==Hints==
==Hints==
Wenn in einem Autopoll Netzwerksystem Datensicherungen von verschiedenen Client-PCs vorgenommen werden müssen, dann müssen die PCs so eingerichtet sein, dass die GBK Datei auf
If in an Autopoll network version the Autopoll backup shall be executed from different client computers, then the client computers have to be configured that the GBK-file on the server computer can be reached over the exactly same path. This because the path can only be stored once in the Autopoll database. If it is not possible to configure the client computers accordingly, then there is the possibility to configure for every client computer separately different paths in the local Autopoll configuration file "APVx.INI". [[intern:DatensicherungNetzwerk]]
dem Server für alle Client-PCs über den selben Pfad zu erreichen ist. Dies aus dem Grunde, weil diese Pfadangaben in der Autopoll Datenbank nur einmalig gespeichert werden können. Sollte es nicht möglich sein die PCs entsprechend einzurichten, so gibt es die Möglichkeit für jeden Client-PC unterschiedliche Pfadangaben in der lokalen Konfigurations- Datei "APVx.INI" einzutragen. [[intern:DatensicherungNetzwerk]]


[[Kategorie:EN_Bedienung]][[Kategorie:EN_Netzwerk]]
[[Kategorie:EN_Bedienung]][[Kategorie:EN_Netzwerk]]

Aktuelle Version vom 6. März 2019, 13:16 Uhr

Preamble

Please read "backup singleplace version" before continuing with this documentation. This documentation is complementary to the other documentation.

Hint: If a Firebird database server 2.x is in use, then the parameter (Settings-parameter) "dasi - checkgbk" has to be set to N.

With a single place version the firebird backup file of the Autopoll database (APVx.GBK) is created on the local computer parallel to the Autopoll database. That means step 2 getting the firebird backup file of the Autopoll database (APVx.GBK) for storing it in the ZIP file causes no problems because everything is running on the same computer and all rights are granted.

In a network version the Autopoll backup should be configured so that the Autopoll application on the server and all Autopoll applicationc on every client computer can execute an Autopoll backup. If the following configurations are not being made then the Autopoll backup can only be made with the Autopoll application on the server. A backup made from a client computer would not be successful because the firebird backup file of the Autopoll database (APVx.GBK) is not in the ZIP file or the backup will end with an error.

With the following configurations the Autopoll client should be able to get the firebird backup file of the Autopoll database from the server for storing it afterwards like mentioned in step 2 in the ZIP file.


Execution

  • Expert mode:

An additional area is being displayed in which the necessary path configurations have to be made for the backup in a network version.

Backup with activated Expert mode: The activation of the Expert mode is only necessary when changes in the paths have to be made (e.x.: initial installation or change of the server computer). After the changes have been made and after a backup has been executed with the new paths, the paths will be stored in the database and will be used from then on when executing a backup.


Description

  • Compression:

If this option is active (by default), then first the Autopoll database will be backuped and then the created firebird backup file of the Autopoll database (APVx.GBK) will be stored and compressed in a ZIP file. If this option is deactivated only the firebird backup file of the Autopoll database (APVx.GBK) will be created.

  • gbk file server

Path of the firebird backup file of the Autopoll database (APVx.GBK) before the compression - server computer point of view -

  • gbk file client

Path of the friebird backup file of the Autopoll database (APVx.GBK) before the compression - client computer point of view - This path has to be configured according to the present infrastructure. It is the path from the client computer to the firebird backup file of the Autopoll databse (APVx.GBK) on the server computer.

  • all other configuration options are not important. The default values are sufficient.


GBK file client variant 1: „mapping“

The server drive or the server folder in which the Autopoll database (APVx.GDB) and the firebird backup file of the Autopoll database (APVx.GBK) are placed, will be mapped.

Example: Z:\AutopollV4\Daten\APV4.GBK or X:\APV4.GBK

When doing the "mapping" it has to be ensured that the mapped drive gets the same drive letter on each client computer because the above mentioned path is only stored once in the database and can*t be configured for every client computer separately.


GBK file client variant 2: „Windows clearance“

Direct access to the cleared folder on the server computer (via UNC path)

Example: \\AutopollV4\apv4.gbk

The Windows clearance to the Autopoll database (APVx.GDB) and the firebird backup file of the Autopoll database (APVx.GBK) should already be configured during the installation of an Autopoll network version by the administrator.

This variant is to be prefered to the "mapping".


Hints

If in an Autopoll network version the Autopoll backup shall be executed from different client computers, then the client computers have to be configured that the GBK-file on the server computer can be reached over the exactly same path. This because the path can only be stored once in the Autopoll database. If it is not possible to configure the client computers accordingly, then there is the possibility to configure for every client computer separately different paths in the local Autopoll configuration file "APVx.INI". intern:DatensicherungNetzwerk

Abgerufen von „https://doku.autopoll.de/index.php?title=EN_backup_network&oldid=9964“